9314JIUsi
ID photo tool · Forms & applications

One upload, every photo spec on the form

Government forms ask for two things at once: US passport photos at 600x600 pixels and under 240KB - and a phone snapshot satisfies neither. Drop your photo into the viewfinder below, drag it onto the head guide, and the tool nails pixels and file size in a single pass. No face detection, no guessing: you frame it, you keep control.

P H O T O  B O O T H Waiting · JPG / PNG / WebP
Step into the booth

Drag a file in, click to browse, or paste with Ctrl+V.
JPG / PNG / WebP, one photo up to 50MB.

KB max

Pixels are set first, then quality walks down until the file fits (with auto-resampling if needed).

Background color (under the photo)
#FFFFFF

Transparent PNGs (pre-cut) get this color filled in; opaque photos hide it. To swap a real photo's background, cut it out first.

Print result
No photo yet
Link:

Everything you drop in stays in this browser - zero uploads, no account. Only your background color and KB target are remembered on this device and disappear when you switch devices or clear site data. Use "Clear my data" in the footer to remove them.

Three steps in the booth

  1. Step inDrop a photo into the viewfinder (or paste, or browse). Phone portraits are rotated upright from their EXIF orientation flag before anything else happens.
  2. Frame itPick a spec - US passport 600x600, Schengen 35x45mm, Canada PR 420x560 and more, or custom pixels. Drag the photo onto the crown line, scroll or pinch to zoom, rotate 90° when needed.
  3. PrintSet the KB target (each spec ships its typical cap) and background color, then download. The result card shows the exact pixels, the real file size and a pass/fail badge; the download name carries both.

Facts and limits

InputJPG / PNG / WebP (transparent PNGs get the chosen background color); HEIC and GIF are not supported - switch your iPhone to Settings → Camera → Formats → Most Compatible first
OutputJPG (the format government upload systems agree on), pixel dimensions exactly matching the spec; download name carries size and weight, e.g. form-600x600-187KB.jpg
Key defaultsSpec defaults to US Passport 600×600; KB target ships per spec (US passport / visa / DV 240, Schengen 240, Canada and UK 500), editable from 5–5000 or "No cap" (exports at quality 92); background defaults to white, plus visa blue, red and a custom picker
ProcessingLocal Canvas in your browser: EXIF orientation upright first, then viewfinder crop-and-scale to the exact pixels, then a top-down quality search to fit the KB cap (auto-resampling when needed); nothing is uploaded, no account; the photo never touches storage - only your background color and KB target live in this device's localStorage
LimitsOne file up to 50MB, source images up to 100MP (working copies above 12MP are auto-downscaled); custom width/height 100–2000px each; one photo at a time, switching specs needs no re-upload
Known edgesNo face detection and no auto background removal - manual framing is the source of truth, recolor by cutting out the photo first; tiny source portraits lose quality when scaled up to spec (interpolation cannot invent detail); extremely tight KB targets may stay unmet even at minimum quality - the result card says so honestly instead of faking a pass

FAQ

Why does my photo sometimes not compress under the KB target?

The tool crops to your pixel size first, then walks quality downward until the file fits. A 600x600 head shot under 240KB almost always fits on the first try. If even the lowest quality plus resampling still overshoots, the photo simply carries too much detail for the target - a busy background, a large canvas, or an unusually small limit. The result card says Not met and shows the real size instead of pretending otherwise. Fixes: use a photo with a cleaner background, raise the target, or run a dedicated image compressor first.

Is 600x600 actually sharp enough for printing?

Yes. 600x600 pixels at 2x2 inches (51x51mm) works out to exactly 300dpi, the resolution print shops treat as the industry floor for ID photos. Schengen 35x45mm at 413x591 is the same math. The thing to watch is your source: if the original is only a couple hundred pixels wide, blowing it up to 600 is interpolated - the print will look soft. That is a source-detail problem, not a spec problem.

When do the background colors matter?

The color sits underneath the photo, so you see it in two cases: transparent PNGs (already cut out) get the chosen color filled in, and any corner the photo does not cover shows the color. A regular opaque photo hides the background entirely - and yes, this tool deliberately skips auto face detection and background replacement, because automated swaps misfire often. To recolor a real photo, cut the background out with a remover tool first, then come back and pick the color here.

Will portrait shots from my phone come out sideways?

No. The tool reads the EXIF Orientation flag (values 1-8) and physically rotates the pixels upright before anything enters the viewfinder. If a photo has a broken or missing flag, the 90-degree rotate buttons next to the frame fix it in one tap.

Do I need to re-upload for a different photo spec?

No. The photo and your framing stay in the viewfinder. Switch the spec - say from US passport to Schengen - and the tool re-crops, re-scales, re-compresses and re-renders automatically. One upload can produce a whole application set.

Is my photo uploaded anywhere?

No. Cropping, scaling, KB compression and JPG encoding all happen inside this device's browser - zero network requests, and the photo itself is never written to local storage. Only two preferences (background color and KB target) are kept in this browser and vanish when you switch devices or clear site data. The Clear my data link in the footer removes them.

Related tools